Skip to content
Align by NETLCO
Sign in

A tuning

A tuning, start to finish

The Guide button, which comes with Pro, runs a 2, 3 or 4 way system in this order. Each step opens the screen it needs, and it is done when the instrument reads it done. The lessons in Training teach each step from the rig up.

  1. 1

    Setup

    Connect the interface, check the inputs and set the reference.

  2. 2

    Each band alone

    Find the top band's delay once and insert it, then capture every band through it.

  3. 3

    The levels

    Each band's level from its solo, the others cut to meet the lowest.

  4. 4

    Each crossover

    Auto Phase where two bands overlap: delay, polarity and all-pass.

  5. 5

    The sheet

    Every band's delay and polarity, put in a DSP channel each.

  6. 6

    EQ each band

    In the Modeler, through the band's own channel.

  7. 7

    All bands

    The processor set from the sheet and the whole system captured.

  8. 8

    More positions

    Measure at several seats and see what they share.

Start with the free RTA and SPL meter.

Both open in your browser with no account, and no audio leaves it. To measure through an audio interface, use Chrome or Edge on a computer. Pro adds the transfer function, EQ and every other tool.