Skip to content
Align by NETLCO
Sign in

The EQ

EQ with a reason for every filter, applied or refused

Bring a measurement you already trust, as a text export or from Align's own inputs. Align fits filters to your target by three rules, and names each region it leaves alone, and why. The Modeler then draws your measurement with the filters on it, and SER lays the system, the EQ and the result together.

  1. 1

    Never boost into a hole

    No boost into a rolloff or a deep null, more than 6 dB under the band's mean. The energy is not there to lift: a boost spends headroom and heats the amplifier without changing what anyone hears.

  2. 2

    Never boost narrow

    A dip narrower than about half an octave moves with the microphone, so it is left alone.

  3. 3

    Cut deeper than you boost

    Cuts reach 12 dB, boosts stop at 3 unless you change it.

The worked example, before and after Align's EQa generated trace through the real engine
  • Before
  • Target
  • After, predicted
  • The working band, where the figures below are read
The worked example's response before Align's EQ, its target, and the predicted response after it, from 20 Hz to 20 kHz.201001k10k-9-6-30+3+6+9
Off target before
3.0 dB rms
Off target after, predicted
1.8 dB rms
Filters placed
5
Regions left alone, each with its reason
3

Start with the free RTA and SPL meter.

Both open in your browser with no account, and no audio leaves it. To measure through an audio interface, use Chrome or Edge on a computer. Pro adds the transfer function, EQ and every other tool.